Spectrum Labs Quick Fix Synthetic Urine

Description

Description
Formula 5.7

The Quick Fix synthetic urine is premixed laboratory urine designed to
protect your privacy during a urine test. The Quick Fix is unisex so a
male or female can use it to pass nicotine tests. To ensure passing a
urinalysis, the Quick Fix contains all the ingredients normally found
in urine and is balanced for pH, specific gravity, creatinine, and
several other urine characteristics.

The Quick Fix bottle comes with an
attached temperature strip and heating pad to ensure the sample is at
body temperature. The Quick Fix contains two ounces of synthetic urine
as required by guidelines. If a lab demands more than two ounces, that
demand is operating outside of most guidelines. Request the lab record
the volume of the sample before disposal and be sure to document the
error.

Product Directions: Heat Quick Fix in advance and
simply pour contents into sample cup. Quick Fix temperature must be
90°-100°F. The Quick Fix container can be microwaved up to 10 seconds
for initial heat. If the temperature remains out of range after first
heating, repeat procedure (read the blue dot on temperature strip). If
the bottle is out of temperature range after two heatings, cool down
(over heated) and retry.

Using the enclosed heater pad alone will
require approximately an hour to heat to 90°-100°F (see enclosed heater
pad for heating instructions). Attach heater pad with tape or rubber
band to the bottle, opposite the temperature strip. The heater pad will
last up to six hours. Coloration may vary from batch to batch. Shake
bottle before and after heating. If unused, sample can be reheated for
random usage.

For novelty use only and
not intended for unlawful purposes.